Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

Fundamental characteristics of input waste of small MSW incinerators in Korea

Waste incineration in a small incinerator is a simple and convenient way of treating waste discharged from small areas or from large facilities and buildings such as business centers, marketplaces, factories, and military units. Despite their ostensible advantages, however, many small incinerators frequently suffer from serious problems, e.g., unsystematic waste feeding, unstable combustion, deficient air pollution control devices, and consequently, environmental pollution. To obtain a better understanding of the characterization of wastes in small incinerators, we investigated a series of fundamental characteristics, i.e., physical composition, bulk density, proximate and ultimate analysis, potential energy content, and so on. The main waste components in small incinerators were identified as paper and plastic; the proportion of food waste was less than that in large incinerators. Especially, a low ratio of food waste had a strong influence on other waste characteristics, e.g., lower moisture content and bulk density, and higher potential energy. On the other hand, in contrast with that of HCl, there was no distinguishable linear relationship between Cl content in waste and PCDD/DF concentration in combustion gas.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

A GIS-based zoning of illegal dumping potential for efficient surveillance

To assist in the efficient surveillance against illegal dumping, this study examined and evaluated two methods to illustrate the illegal dumping potential of sites using GIS (Geographic Information System) data. One approach focused on the occurrence of illegal dumping sites; the other on the size of the illegal dumping. Both approaches to zoning were implemented for the Kanto region of Japan, utilizing seven or eight major geographical attributes most closely related to illegal dumping. The zoning results revealed the areas requiring patrols against illegal dumping. Evaluation of the zoning results using the ROC (Receiver Operating Characteristic) curve showed the number of illegal dumping sites detectable under certain surveillance conditions and that the size-based zoning was superior, but this superiority was insignificant for revealing sites with higher potential for large illegal dumping, for which it would be sufficient to use the occurrence-based zoning. The evaluation also showed the contribution of each geographical attribute. Finally, application of the ROC curve to the surveillance planning process was examined, which enables the total social cost of pollution by illegal dumping, rehabilitation of dumping sites, and illegal dumping surveillance to be minimized.     

Determination of nonylphenol ethoxylates and octylphenol ethoxylates in environmental samples using 13C-labeled surrogate compounds

Alkylphenol polyethoxylates (APEOs) have been widely used as nonionic surfactants in a variety of industrial and commercial products. Typical compounds are nonylphenol polyethoxylates (NPEOs) and octylphenol polyethoxylates (OPEOs), which serve as precursors to nonylphenol (NP) and octylphenol (OP), respectively. NP and 4-t-OP are known to have endocrine disrupting effects on fish (medaka, Oryzias latipes), so it is important to know the concentrations of APEOs in the environment. Because the analytical characteristics of these compounds depend on the length of the ethoxy chain, it is necessary to use appropriate compounds as internal standards or surrogates. We synthesized two 13C-labeled surrogate compounds and used these compounds as internal standards to determine NPEOs and OPEOs by high-performance liquid chromatography (LC)-mass spectrometry. Method detection limits were 0.015 microg/L for NP (2)EO to 0.037 microg/L for NP(12)EO, and 0.011 microg/L for OP(3,6)EO to 0.024 microg/L for OP (4)EO. NPEO concentrations in water from a sewage treatment plant were less than 0.05-0.52 microg/L for final effluent and 1.2-15 microg/L for influent. OPEO concentrations were less than 0.05-0.15 microg/L for the final effluent and less than 0.05-1.1 microg/L for influent.     

Recycling process for yttria-stabilized tetragonal zirconia ceramics using a hydrothermal treatment

The recycling process for 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP) sintered at 1450°–1550°C was examined by applying low-temperature degradation of zirconia ceramics under hydrothermal conditions. Hydrothermal treatment at a temperature from 200° to 240°C can lead to the spontaneous disintegration of 3Y-TZP sintered bodies into powdery particles. The hydrothermally obtained zirconia powder was found to consist of primary particles and aggregated particles. Detailed X-ray diffraction measurement revealed the formation of a cubic zirconia phase in the 3Y-TZP sintered bodies, which seemed to inhibit the disintegration of aggregated particles toward the primary particle level. The reclaimed 3Y-TZP powder was sintered again through a conventional powder processing route. The mechanical properties and microstructure of recycled 3Y-TZP sintered specimens were examined by comparison with those of the original 3Y-TZP sintered bodies. Dense recycled 3Y-TZP sintered at a higher temperature exhibited higher fracture toughness to some degree than the original 3Y-TZP.     

Effects of the tsunami on fisheries and coastal livelihood: a case study of tsunami-ravaged southern Sri Lanka

Beyond the death toll, the tsunami of 26 December 2004 crippled many of the livelihood assets (human, social, physical, financial and natural) available to assist those directly affected. Drawing on surveys of three villages in three districts in the south of Sri Lanka, this paper describes the livelihood asset building capacity of the fishing communities. Assessments are also made of the impact of the tsunami on coastal communities and the impact of government policy on rebuilding. A livelihood asset score was calculated for each village by comparing their strengths in capacity building. In all aspects of capital building, including human, social, financial, physical and natural capital, the fishing community in Tangalle was significantly ahead of the fishing communities in Hikkaduwa and Weligama. Experienced fishermen with better educational backgrounds had a significant influence on the capacity building of livelihood assets. Relocation and resettlement plans brought persistent uncertainty to fishermen in Hikkaduwa and Weligama and threatened to disrupt their community bonds and social networks.     

Biobased Contents of Organic Fillers and Polycaprolactone Composites with Cellulose Fillers Measured by Accelerator Mass Spectrometry Based on ASTM D6866

The biobased contents of raw materials such as starches, sugar, chitin, or wood powders for biomass plastics were measured using Accelerator Mass Spectrometry (AMS) based on ASTM D6866. AMS measures the isotope carbon ratio of ¹⁴C to ¹²C and ¹³C in graphite derived from sample powders. The biobased contents of starches, sugar or chitin were almost 100% which means that they are fully biobased. The biobased contents of the wood powders were over 140% due to the effect of the post 1950s ¹⁴C injection due to nuclear testing. Poly(ε-caprolactone) (PCL) composite samples were prepared using the polymerization and direct molding method. The starting compound was the ε-caprolactone monomer liquid combined with cellulose and inorganic fillers using aluminum triflate as a catalyst at 80 °C for 6 or 24 h. PCL cylinder-shaped composite samples with a homogeneously dispersed cellulose filler were prepared with M_n = 4,600 (M_w/M_n = 2.9). The biobased content of the PCL composite with 50 wt% cellulose filler (51.67%) measured using AMS was slightly higher than the carbon ratio of cellulose in the starting powder samples (41.3 mol%). This is due to the higher biobased content (112.70%) of the cellulose filler used in this study. The biobased content of the polymer composite powders by AMS was found not to be affected by the presence of inorganic fillers, such as talc.     

Blue carbon in human-dominated estuarine and shallow coastal systems

Estuarine and shallow coastal systems (ESCS) are recognized as not only significant organic carbon reservoirs but also emitters of CO₂ to the atmosphere through air–sea CO₂ gas exchange, thus posing a dilemma on ESCS’s role in climate change mitigation measures. However, some studies have shown that coastal waters take up atmospheric CO₂ (C_atm), although the magnitude and determinants remain unclear. We argue that the phenomenon of net uptake of C_atm by ESCS is not unusual under a given set of terrestrial inputs and geophysical conditions. We assessed the key properties of systems that show the net C_atm uptake and found that they are often characteristic of human-dominated systems: (1) input of high terrestrial nutrients, (2) input of treated wastewater in which labile carbon is highly removed, and (3) presence of hypoxia. We propose that human-dominated ESCS are worthy of investigation as a contributor to climate change mitigation.